IM16P8P-PF
IM16P8P-TBPCB
IM16P8P-TBPLUG
PT24I
PT24I-KIT
PT24IP-TBPCB
PT24IP-TBPCB-KIT
PT24IP-TBPLUG
PT24IP-TBPLUG-KIT
IM16P8P | Double width iMod prototype board, press-fit connectors, Lead Free. | CAD$2.40 In Stock |
|
Description
The im16p8p is a prototype board that has been designed to fit on two adjacent imod Ports. It can however also be mounted on other boards, like Vero Board, or Modtronix MicroX Prototype boards. An iMod port is basically just two rows of 8 pads, and is present on many Modtronix boards as a method of adding functionalty, for details, click here. This board has protyping space for adding custom circuitry, and space for a 8 pins, 3.5mm terminal block connector to be soldered on, like the TB08MP350 or TB08B-F350-W4.For this board to be mounted onto a target board, two pin headers or press-fit pin headers have to be soldered onto it. They are soldered in the two iMod port connectors (two outer rows of 8 pads), as shown in this picture. These rows are spaced 1.6" (40.64mm) apart, which is the width of two adjacent iMod ports. Each row has 8 pins, 2.54mm (0.1") appart. It is recommended to use the following connectors:
Two HDR1X5PF-M254-30 5 pin male, 2.54mm, press-fit headers. These connectors are soldered onto the top 5 pads of the 8 pin connectors, as shown in this picture. By using a 5 pin, in stead of 8 pin, press-fit connector it is much easier inserting and removing the board from the target board. The top 5 pins of the iMod port contains the power, and signals required for most circuits.
Two HDR1X8PF-M254-30 8 pin male, 2.54mm, press-fit headers. By using two 8 pin connectors,
Two HDR1X8-M254-30 8 pins male, 2.54mm, pin headers.
For a prototyping solution, two HDR1X8-F254SWISS female headers can be soldered onto the target board, and two HDR1X8-M254SWISS 8 pin male, 2.54mm, pin headers onto this board. This will allow this board to easily be plugged into, and removed from the target board.
Current Modtronix products with iMod ports are:
Presto SBC Boards
The im16p8p is part of the Modtronix Presto iMod product range.
The im16p8p has two rows of press-fit connectors on the bottom of the board. They can be pressed into 1.00mm holes on a 1.6mm thick (standard PCB thickness) target board. No special tool is required, they can be inserted by applying firm pressure to the connectors. Once fitted to the target board, the board is very secure, and can not be removed by hand any more. A screwdriver or similar tool can be used to remove the board if required. If the im16p8p is to be soldered onto the target board, 1.10mm holes can be used. This will allow it to be inserted much easier than with 1.00mm holes. When using 1.10mm holes, the board can be removed by hand.
IM16P8P-PF | Double width iMod prototype board, press-fit connectors, Lead Free. | CAD$5.70 In Stock |
|
Description
The im16p8p-pf is a prototype board with press-fit connectors, that can be mounted on two rows of 1.0mm holes, spaced 1.6" (40.64mm) apart. Each row has 8 pins, 2.54mm (0.1") appart. It has been designed to be mounted on two adjacent iMod Ports, but can also be mounted on other boards, like Vero Board, or Modtronix MicroX Prototype boards. It has space for a 8 pin, 3.5mm terminal block connector like the TB08MP350 or TB350-08P.Current Modtronix products with iMod ports are:
Presto SBC Boards
The im16p8p-pf is part of the Modtronix Presto iMod product range.
The im16p8p-pf has two rows of press-fit connectors on the bottom of the board. They can be pressed into 1.00mm holes on a 1.6mm thick (standard PCB thickness) target board. No special tool is required, they can be inserted by applying firm pressure to the connectors. Once fitted to the target board, the board is very secure, and can not be removed by hand any more. A screwdriver or similar tool can be used to remove the board if required. If the im16p8p-pf is to be soldered onto the target board, 1.10mm holes can be used. This will allow it to be inserted much easier than with 1.00mm holes. When using 1.10mm holes, the board can be removed by hand.
IM16P8P-TBPCB | Double width iMod prototype board with screw type terminal block connector, press-fit connectors, Lead Free. | CAD$6.85 In Stock |
|
Description
The im16p8p-tbpcb is a prototype board with press-fit connectors, that can be mounted on two rows of 1.0mm holes, spaced 1.6" (40.64mm) apart. Each row has 8 pins, 2.54mm (0.1") appart. It has been designed to be mounted on two adjacent iMod Ports, but can also be mounted on other boards, like Vero Board, or Modtronix MicroX Prototype boards.Current Modtronix products with iMod ports are:
Presto SBC Boards
The im16p8p-tbpcb is part of the Modtronix Presto iMod product range.
The im16p8p-tbpcb has two rows of press-fit connectors on the bottom of the board. They can be pressed into 1.00mm holes on a 1.6mm thick (standard PCB thickness) target board. No special tool is required, they can be inserted by applying firm pressure to the connectors. Once fitted to the target board, the board is very secure, and can not be removed by hand any more. A screwdriver or similar tool can be used to remove the board if required. If the im16p8p-tbpcb is to be soldered onto the target board, 1.10mm holes can be used. This will allow it to be inserted much easier than with 1.00mm holes. When using 1.10mm holes, the board can be removed by hand.
| Additional photos: click on text for larger photos | ||
|---|---|---|
|
|
|
IM16P8P-TBPLUG | Double width iMod prototype board with pluggable screw type terminal block connector, press-fit connectors, Lead Free. | CAD$7.99 In Stock |
|
Description
The im16p8p-tbplug is a prototype board with press-fit connectors, that can be mounted on two rows of 1.0mm holes, spaced 1.6" (40.64mm) apart. Each row has 8 pins, 2.54mm (0.1") appart. It has been designed to be mounted on two adjacent iMod Ports, but can also be mounted on other boards, like Vero Board, or Modtronix MicroX Prototype boards.Current Modtronix products with iMod ports are:
Presto SBC Boards
The im16p8p-tbplug is part of the Modtronix Presto iMod product range.
The im16p8p-tbplug has two rows of press-fit connectors on the bottom of the board. They can be pressed into 1.00mm holes on a 1.6mm thick (standard PCB thickness) target board. No special tool is required, they can be inserted by applying firm pressure to the connectors. Once fitted to the target board, the board is very secure, and can not be removed by hand any more. A screwdriver or similar tool can be used to remove the board if required. If the im16p8p-tbplug is to be soldered onto the target board, 1.10mm holes can be used. This will allow it to be inserted much easier than with 1.00mm holes. When using 1.10mm holes, the board can be removed by hand.
| Additional photos: click on text for larger photos | ||
|---|---|---|
|
|
|
PT24I | Prototype Daughter Board, fully assembled, Lead Free. | CAD$5.70 In Stock |
|
Description
The PT24I is a prototype daughter board for our Presto range of SBC Main Boards. It plugs into the daughter board connector of the SBC (Single Board Computer) Main Board, and makes all signals available for use on the prototyping area.For a list of Presto Main Boards that can be used together with this board click here. The PT24I is part of the Modtronix Presto product range.
PT24I-KIT | Prototype Daughter Board, not assembled, Lead Free. | CAD$3.90 In Stock |
|
Description
The PT24I-KIT is a prototype daughter board for our Presto range of SBC Main Boards. It plugs into the daughter board connector of the SBC (Single Board Computer) Main Board, and makes all signals available for use on the prototyping area. It is in kit form, and has not been assembled! It consists out of the PCB, with two 12 pin connectors. The only thing that has to be done is solder the two connectors onto the PCB.For a list of Presto Main Boards that can be used together with this board click here. The PT24I-KIT is part of the Modtronix Presto product range.
PT24IP-TBPCB | Prototype Daughter Board with terminal block connectors, fully assembled, Lead Free. | CAD$7.99 In Stock |
|
Description
The PT24IP-TBPCB is a prototype daughter board for our Presto range of SBC Main Boards. It plugs into the daughter board connector of the SBC (Single Board Computer) Main Board, and makes all signals available for use on the prototyping area. It is fully assembled, and consists of the PCB with two 12 pin header connectors, and two TB08B-F350-W4 8 pin terminal blocks.For a list of Presto Main Boards that can be used together with this board click here. The PT24IP-TBPCB is part of the Modtronix Presto product range.
PT24IP-TBPCB-KIT | Prototype Daughter Board, not assembled with terminal block connectors, Lead Free. | CAD$5.70 In Stock |
|
Description
The PT24IP-TBPCB-KIT is a prototype daughter board for our Presto range of SBC Main Boards. It plugs into the daughter board connector of the SBC (Single Board Computer) Main Board, and makes all signals available for use on the prototyping area. It is in kit form, and has not been assembled! It consists of the PCB with two 12 pin header connectors, and two TB08B-F350-W4 8 pin terminal blocks.For a list of Presto Main Boards that can be used together with this board click here. The PT24IP-TBPCB-KIT is part of the Modtronix Presto product range.
PT24IP-TBPLUG | Prototype Daughter Board with pluggable terminal blocks, fully assembled, Lead Free. | CAD$10.50 In Stock |
|
Description
The PT24IP-TBPLUG is a prototype daughter board for our Presto range of SBC Main Boards. It plugs into the daughter board connector of the SBC (Single Board Computer) Main Board, and makes all signals available for use on the prototyping area. It is fully assembled, and consists of the PCB with two 12 pin header connectors, two TB08MP350 8 pin headers, and two TB08FS350 8 pin, 3.5mm terminal block plugs!For a list of Presto Main Boards that can be used together with this board click here. The PT24IP-TBPLUG is part of the Modtronix Presto product range.
PT24IP-TBPLUG-KIT | Prototype Daughter Board, not assembled with pluggable terminal blocks, Lead Free. | CAD$6.90 In Stock |
|
Description
The PT24IP-TBPLUG-KIT is a prototype daughter board for our Presto range of SBC Main Boards. It plugs into the daughter board connector of the SBC (Single Board Computer) Main Board, and makes all signals available for use on the prototyping area. It is in kit form, and has not been assembled! It consists of the PCB with two 12 pin header connectors, two TB08MP350 8 pin headers, and two TB08FS350 8 pin, 3.5mm terminal block plugs!For a list of Presto Main Boards that can be used together with this board click here. The PT24IP-TBPLUG-KIT is part of the Modtronix Presto product range.
