Connectors
HeadersMicromatch
Pluggable Terminal Blocks
PCB Terminal Blocks
MICROMATCH-6FP | Ribbon cable with two 6 pin Micro Match connectors, 300mm long. | CAD$1.10 In Stock |
|
6 Pin Micro Match female connector, 1.27mm pitch, red, 1.5A per pin. This connector is used as the I2C and SPI connectors found on most new Modtronix SBC boards (SBC28PC, SBC44B...). It mates with the Micro Match 6 pin Male-On-Wire connector. The AMP product code for this connector is 7-215079-6.
MICROMATCH-6MW | 6 Pin Micro Match connector, male on wire, 1.27mm pitch. | CAD$1.10 In Stock |
|
6 Pin Micro Match male connector, 1.27mm pitch, red, 1.5A per pin. This connector fits onto the Micro Match I2C and SPI connectors found on most new Modtronix SBC boards (SBC28PC, SBC44B...). Multiple of these connectors can be daisy chained together via standard 1.27mm pitch ribbon cable. The AMP product code for this connector is 7-215083-6.
PCB Terminal Blocks 2.54mm
These miniature PCB Terminal Blocks have a pin spacing of 2.54mm (0.1"). This makes them very useful for mounting on a standard prototype board, like the Modtronix PT01TC-ASM , PT01FC-ASM , PT01T-ASM, Presto Prototype Boards, or any other PCB with pads 0.1" (2.54mm) apart.TB03B-F254-R4 | PCB Mount Terminal Block, 2.54mm, 3 Pins, Rising Clamp Screw Type, RoHS compliant and lead free. | CAD$0.35 In Stock |
|
TB05B-F254-R4 | PCB Mount Terminal Block, 2.54mm, 5 Pin, Rising Clamp Screw Type, RoHS compliant and lead free. | CAD$0.50 In Stock |
|
Description
Material:Screws: M1.5 Steel Zinc plated
Pin Header: Brass, Tin plated
Contact: Brass, Ni plated
Housing: PA66, UL94V-0
RoHS compliant and lead free
Electrical:
Rated voltage: 150V
Rated current: 6A
Contact resistance: 20 mΩ
Insulation resistance: 5000MΩ/1000V
Withstanding voltage: AC2000V/1Min
Wire range: 26-18AWG 1mm2
Mechanical:
Temperature range: -40℃ to +105℃
Torque: 0.15Nm(1.3lb.in)
Strip length: 3.7mm to 4.7mm
Dimensions :
PCB Terminal Blocks 3.50mm
|
| These PCB Terminal Blocks are available in 2 pin and 3 pin versions. Multiple of these connectors can be linked together via grooves along the side of them. They simply slide together. This way any other pin format can be achieved! The photo on the left shows two 3 pin connectors and a 2 pin connector linked together to form a 8 pin connector. It shows two connectors, the one in the process of being linked together, and the other already linked (slided) together. |
TB02B-F350-W4 | PCB Mount Terminal Block, 2 Pins, 3.5mm, Wire Protector Screw Type. | CAD$0.30 In Stock |
|
TB03B-F350-W4 | PCB Mount Terminal Block, 3 Pins, 3.5mm, Wire Protector Screw Type. | CAD$0.45 In Stock |
|
Description :
Material:Screws: M2 Steel Zinc plated
Wire Guard: Phosphor bronze Ni plated or stainless steel
Pin Header: Brass, Tin plated
Housing: PA66, UL94V-0
RoHS compliant and lead free
Electrical:
Rated voltage: 300V
Rated current: 10A
Contact resistance: 20 mΩ
Insulation resistance: 5000MΩ/1000V
Withstanding voltage: AC1500V/1Min
Wire range: 24-18AWG 1mm2
Mechanical:
Temperature range: -40℃ to +105℃
Maximum Soldering: +250℃, for 5 seconds
Torque: 02Nm(1.8lb.in)
Strip length: 4.5mm to 5.0mm
Linking Multiple Connectors :
Multiple of these connectors can be linked together via grooves along the side of them. They simply slide together. The photo below shows two 3 pin connectors and a 2 pin connector linked together to form a 8 pin connector. The left photo shows them linked together. The right photo shows them in the process of being linked (slided) together.
This connector consists of a single 2 pin connector.
Dimensions :
PCB Terminal Blocks 3.81mm
|
| These PCB Terminal Blocks are available in 2 pin and 3 pin versions. Multiple of these connectors can be linked together via grooves along the side of them. They simply slide together. This way any other pin format can be achieved! This photo shows two 3 pin connectors and a 2 pin connector linked together to form a 8 pin connector. The connector on the left shows them linked together. The connector on the right shows them in the process of being linked (slided) together. |
TB340-02P381 | PCB Mount Terminal Block, 2 Pin, 3.81mm, Screw Type. | CAD$0.35 In Stock |
|
TB340-03P381 | PCB Mount Terminal Block, 3 Pin, 3.81mm, Screw Type. | CAD$0.45 In Stock |
|
TB340-12P381 | PCB Mount Terminal Block, 12 Pin, 3.81mm, Screw Type. | CAD$1.65 In Stock |
|
PCB Mount Terminal Block, 3.81mm, 12 Pin, Screw Type, RoHS compliant and lead free. Please note that the image shown is of a 3 pin connector. This connector is exactly the same, but has 12 pins!
Description
Material:Screws: M2 Steel Zinc plated
Wire Guard: Phosphor bronze Ni plated or stainless steel
Pin Header: Brass, Tin plated
Housing: PA66, UL94V-0
RoHS compliant and lead free
Electrical:
Rated voltage: 300V
Rated current: 10A
Contact resistance: 20 mΩ
Insulation resistance: 5000MΩ/1000V
Withstanding voltage: AC1500V/1Min
Wire range: 24-18AWG 1mm2
Mechanical:
Temperature range: -40℃ to +105℃
Maximum Soldering: +250℃, for 5 seconds
Torque: 02Nm(1.8lb.in)
Strip length: 4.5mm to 5.0mm
Linking Multiple Connectors
Multiple of these connectors can be linked together via grooves along the side of them. They simply slide together. The photo below shows two 3 pin connectors and a 2 pin connector linked together to form a 8 pin connector. The left photo shows them linked together. The right photo shows them in the process of being linked (slided) together.This connector consists out of four 3 pin connectors linked together.
Dimensions
PCB Terminal Blocks 5.00mm
|
| These PCB Terminal Blocks are available in 2 pin and 3 pin versions. Multiple of these connectors can be linked together via grooves along the side of them. They simply slide together. This way any other pin format can be achieved! The photo on the left shows two 3 pin connectors and a 2 pin connector linked together to form a 8 pin connector. It shows two connectors, the one in the process of being linked together, and the other already linked (slided) together. |
TB02B-F500-W2 | PCB Mount Terminal Block, 2 Pins, 5.00mm, Wire Protector Screw Type. | CAD$0.25 In Stock |
|
TB03B-F500-W2 | PCB Mount Terminal Block, 3 Pins, 5.00mm, Wire Protector Screw Type. | CAD$0.35 In Stock |
|
Description :
Material:Screws: M2.5 Steel Zinc plated
Wire Guard: Stainless Steel
Pin Header: Brass, Tin plated
Housing: PBT, UL94V-0
RoHS compliant and lead free
Electrical:
Rated voltage: 300V
Rated current: 15A
Contact resistance: 20 mΩ
Insulation resistance: 5000MΩ/DC1000V
Withstanding voltage: AC1500V/1Min
Wire range: 22-14AWG 1.5mm2
Mechanical:
Temperature range: -30℃ to +120℃
Torque: 0.4Nm(3.6lb.in)
Strip length: 4.5mm to 5.0mm
Linking Multiple Connectors :
Multiple of these connectors can be linked together via grooves along the side of them. They simply slide together. The photo below shows two 3 pin connectors and a 2 pin connector linked together to form a 8 pin connector. It shows two connectors, the one in the process of being linked together, and the other already linked (slided) together.
This connector consists of a single 2 pins connector
Dimensions :
PCB Terminal Blocks 5.08mm:
TB02B-F508-R4 | PCB Mount Terminal Block, 2 Pins, 5.08mm, Rising Clamp Screw Type, RoHS. | CAD$0.25 In Stock |
|
TB03B-F508-R4 | PCB Mount Terminal Block, 3 Pins, 5.08mm, Rising Clamp Screw Type, RoHS. | CAD$0.35 In Stock |
|
Description:
Material:Screws: M2.5 Steel Zinc plated
Wire Guard: Stainless Steel
Pin Header: Brass, Tin plated
Housing: PA66, UL94V-0
RoHS compliant and lead free
Electrical:
Rated voltage: 300V
Rated current: 10A
Contact resistance: 20 mΩ
Insulation resistance: 5000MΩ/DC1000V
Withstanding voltage: AC2000V/1Min
Wire range: 24-12AWG 2.5mm2
Mechanical:
Temperature range: -40℃ to +105℃
Torque: 0.4Nm(3.6lb.in)
Strip length: 6.0mm to 7.0mm
Linking Multiple Connectors:
Multiple of these connectors can be linked together via grooves along the side of them. They simply slide together. The photo below shows two 3 pin connectors and a 2 pin connector linked together to form a 8 pin connector. It shows two connectors, the one in the process of being linked together, and the other already linked (slided) together.
This connector consists of a single 2 pin connector.
Dimensions:
Pluggable Terminal Block 3.50mm :
TB08FS350 | Female 8 pins 3.5mm Terminal Block, Screw Type. | CAD$1.50 In Stock |
|
Specifications:
Rated voltage: 300V
Rated current: 8A
Wire Range: 28-16AWG1.5mm2
Withstanding voltage: AC2000V/1Min
Insulation resistance: 5000MΩ/1000V
Contact resistance: 20 mΩ
Temperature range: -40℃ to +105℃
Torque: 0.2Nm(1.7Lb.in)
Strip Length: 6-7mm
Housing: PA66, UL94V-0
Screws: M2, steel, Zinc plated
Contact: Phosphor Bronz
RoHS compliant and lead free
Dimensions:
TB08MP350 | Male 8 pins 3.5mm Terminal Block, Right Angle PCB Mount | CAD$1.10 In Stock |
|
Specifications:
Rated voltage: 300VRated current: 8A
Withstanding voltage: AC2000V/1Min
Insulation resistance: 5000MΩ/1000V
Contact resistance: 20 mΩ
Temperature range: -40℃ to +105℃
Housing: PA66, UL94V-0
Pin Header: Brass, Tin plated
RoHS compliant and lead free
Dimensions:
TB02MP381 | Male 2 pin 3.81mm Terminal Block, Right Angle PCB Mount. | CAD$0.35 In Stock |
|
Male 2 pin 3.81mm Terminal Block, right angle PCB mount. Each contact is rated at 300V, 8A. Please note that the image shown might be of a connector with a different number of pins!
TB05MP381 | Male 5 pin 3.81mm Terminal Block, Right Angle PCB Mount. | CAD$0.75 In Stock |
|
Male 5 pin 3.81mm Terminal Block, right angle PCB mount. Each contact is rated at 300V, 8A. Please note that the image shown might be of a connector with a different number of pins!
TB08MP381 | Male 8 pin 3.81mm Terminal Block, Right Angle PCB Mount. | CAD$1.10 In Stock |
|
Male 8 pin 3.81mm Terminal Block, right angle PCB mount. Each contact is rated at 300V, 8A. Please note that the image shown might be of a connector with a different number of pins!
TB12MP381 | Male 12 pin 3.81mm Terminal Block, Right Angle PCB Mount. | CAD$1.60 In Stock |
|
Male 12 pin 3.81mm Terminal Block, right angle PCB mount. Each contact is rated at 300V, 8A. Please note that the image shown might be of a connector with a different number of pins!
Specifications:
Pin header: Brass,Tin platedHousing:PA66 UL94V-0
Rated Voltage: 300V
Rated Current: 8A
Contact Resistance: 20mΩ
Insulation Resistance:5000M/1000V
Withstand Voltage: AC1500V/1Min
Temp. Range: -40℃ to +130℃
Max Soldering: +250℃ for 5Sec
TB05FS381 | Female 5 pin 3.81mm Terminal Block, Screw Type. | CAD$0.95 In Stock |
|
Female 5 pin 3.81mm Terminal Block, Screw Type. Each contact is rated at 300V, 8A. Please note that the image shown might be of a connector with a different number of pins!
TB08FS381 | Female 8 pin 3.81mm Terminal Block, Screw Type. | CAD$1.45 In Stock |
|
Female 8 pins 3.81mm Terminal Block, Screw Type. Each contact is rated at 300V, 8A. Please note that the image shown might be of a connector with a different number of pins!
TB12FS381 | Female 8 pin 3.81mm Terminal Block, Screw Type. | CAD$2.10 In Stock |
|
Female 12 pin 3.81mm Terminal Block, Screw Type. Each contact is rated at 300V, 8A. Please note that the image shown might be of a connector with a different number of pins!
Specifications:
Screw: M2 steel Zinc-platedContact:Phoshor bronze
Housing:PA66 UL94V-0
Rated Voltage: 300V
Rated Current: 8A
Contact Resistance: 20mΩ
Insulation Resistance:5000M/1000V
Withstand Voltage: AC1500V/1Min
Wire Range: 22-16AWG 1.5mm2
Temp. Range: -40℃ to +130℃
Max Soldering: +250℃ for 5Sec
Torque: 0.2Nm(1.7lb.in
Strip Length: 6-7mm
Click here for a dimensions drawing of this product.
Fits onto the Terminal Block connector of various Modtronix boards.
HDR1X32M254 | 1x32 Pin male header, 2.54mm. | CAD$0.95 In Stock |
|
HDR2X8F200F | 2x8 Pin female header, 2.00mm(Frontend Connector). | CAD$0.60 In Stock |
|
HDR2X8M200F | 2x8 Pin male header, 2.00mm(Frontend Connector). | CAD$0.55 In Stock |
|
HDR2X12-M254-75 | 2x12 Pin male header, 2.54mm Daughter board connector. | CAD$0.90 In Stock |
|
Press-Fit Headers
HDR1X2PF-M254-30 | 2 Pins male press-fit header, 2.54mm | CAD$0.10 In Stock |
|
This connector can be pressed into a pad with a 1.00mm to 1.10mm hole (standard 1.6mm PCB width). When using a 1.00mm hole, the connector will fit very tightly, and a tool is needed for removing it. When using a 1.10mm hole, the connector is not so tight, and can easily be inserted and removed by hand. Gold plated.
HDR1X3PF-M254-30 | 3 Pins male press-fit header, 2.54mm | CAD$0.15 In Stock |
|
This connector can be pressed into a pad with a 1.00mm to 1.10mm hole (standard 1.6mm PCB width). When using a 1.00mm hole, the connector will fit very tightly, and a tool is needed for removing it. When using a 1.10mm hole, the connector is not so tight, and can easily be inserted and removed by hand. Gold plated.
HDR1X4PF-M254-30 | 4 Pins male press-fit header, 2.54mm | CAD$0.30 In Stock |
|
This connector can be pressed into a pad with a 1.00mm to 1.10mm hole (standard 1.6mm PCB width). When using a 1.00mm hole, the connector will fit very tightly, and a tool is needed for removing it. When using a 1.10mm hole, the connector is not so tight, and can easily be inserted and removed by hand. Gold plated.
HDR1X5PF-M254-30 | 5 Pins male press-fit header, 2.54mm | CAD$0.40 In Stock |
|
This connector can be pressed into a pad with a 1.00mm to 1.10mm hole (standard 1.6mm PCB width). When using a 1.00mm hole, the connector will fit very tightly, and a tool is needed for removing it. When using a 1.10mm hole, the connector is not so tight, and can easily be inserted and removed by hand. Gold plated.
HDR1X6PF-M254-30 | 6 Pins male press-fit header, 2.54mm | CAD$0.45 In Stock |
|
This connector can be pressed into a pad with a 1.00mm to 1.10mm hole (standard 1.6mm PCB width). When using a 1.00mm hole, the connector will fit very tightly, and a tool is needed for removing it. When using a 1.10mm hole, the connector is not so tight, and can easily be inserted and removed by hand. Gold plated.
HDR1X8PF-M254-30 | 8 Pins male press-fit header, 2.54mm | CAD$0.60 In Stock |
|
This connector can be pressed into a pad with a 1.00mm to 1.10mm hole (standard 1.6mm PCB width). When using a 1.00mm hole, the connector will fit very tightly, and a tool is needed for removing it. When using a 1.10mm hole, the connector is not so tight, and can easily be inserted and removed by hand. Gold plated.
HDR1X8-M254SWISS | 8 Pins, Swiss Round (Machined) male Header, 2.54mm | CAD$0.30 In Stock |
|
HDR1X10-M254SWISS | 10 Pins, Swiss Round (Machined) male Header, 2.54mm | CAD$0.35 In Stock |
|
HDR1X4-F254SWISS | 4 Pins, Swiss Round (Machined) female Header, 2.54mm | CAD$0.15 In Stock |
|
HDR1X8-F254SWISS | 8 Pins, Swiss Round (Machined) female Header, 2.54mm | CAD$0.30 In Stock |
|
