MicroX Prototype Boards
PTO1FC-ASMPT01TC-ASM
PT01T-ASM
PT10E-ASM
PT24E-ASM
PTO1FC-ASM | Compact prototype Frontend board, connector assembled. | CAD$4.60 In Stock |
|
Compact prototype frontend board, connector assembled. This board will plug into the Frontend Board Connector of any of our MicroX Main Boards(SBCs).
Below are some examples of prototype boards pluged into the Main Board's Frontend and Daughter Board connector.
PTO1TC-ASM | Compact prototype Daughter board, connector assembled. | CAD$5.25 In Stock |
|
Compact Prototype daughter board, connector assembled. This board will plug into the daughter board connector of any of our MicroX Main Boards(SBCs).
Below are some examples of prototype boards pluged into the Main Board's Frontend and Daughter Board connector.
PTO1T-ASM | Compact prototype Daughter board for SBC44B, connector assembled. | CAD$6.40 In Stock |
|
PT10E-ASM | Prototype board with two 5 pins terminal block connectors and a LED, fully assembled. | CAD$12.95 In Stock |
|
Prototype board with two 5 pin terminal block connectors and a LED, fully assembled.
Description
The PT10E is a prototype board. It has been designed for a MicroX SBC Main Board to be plugged onto it, and to fit in a ENC2015S enclosure. This board will normally be used together with a MicroX SBC Main board, an enclosure and two enclosure panels (face plates). The picture on the right shows it mounted in an enclosure, with an enclosure front panel. All terminal block contacts are numbered on the enclosure panel. Additionally space has been provided to write something next to each contact.
It is fully assembled, and supplied with the terminal block connector and plug as shown in the photo above.
There is plenty of prototype space for the user. All pins (CPU port pins and power) of the two 2x24 pin daughter board connectors are available, and are clearly marked on the PCB. Two 5 pin terminal block connectors are available for the users application. There are also 3 LEDs on the board. One is connected to power, and the other two (marked A and B on the front panel) to port pins A4 and A5. All LEDs have 1k resistors in series with them. Additionally space has been provided to write something next to each LED.
The board schematics and PCB layout can be downloaded here.
| Additional photos: click on text for larger photos | ||
|---|---|---|
|
|
|
Daughter Boards
This prototype board can be used by itself and a Daughter Board. Or, with a Daughter Board, an ENC2015S enclosure and an enclosure front and rear panel.
The following MicroX SBC Main Board can be used together with this board:
• SBC65EC or SBC68EC : The following photos show the rear of the PT10E board in an ENC2015S enclosure with this SBC board and the network Enclosure Rear Panels (face plates). Choose the "Network Panel" from the options below for this Enclosure Rear Panel.
|  Larger Photo |
• SBC28DC : The following photos show the rear of the PT10E board in an ENC2015S enclosure with this SBC board and the RS-232 Enclosure Rear Panels (face plates). Choose the "RS232 Panel" from the options below for this Enclosure Rear Panel.
|  Larger Photo |
• SBC28PC-IR4 : The following photos show the rear of the PT10E board in an ENC2015S enclosure with this SBC board and the RS-485 Enclosure Rear Panels (face plates). Choose the "RS485 Panel" from the options below for this Enclosure Rear Panel.
• SBC28PC-IR2: The following photos show the rear of the PT10E board in an ENC2015S enclosure with this SBC board and the CAN Enclosure Rear Panels (face plates). Choose the "CAN Bus Panel" from the options below for this Enclosure Rear Panel.
|  Larger Photo |
This product consists of:
PT10E Prototype board, fully assembled. As shown in this photo.
Two TB05FS381 5 pin terminal block plugs.
The following is NOT included, and can be added below as "Available Options":
Enclosure Panel (face plate) for the ENC2015S enclosure. Can be selected in the Enclosure Panel (Face Place) option below.
| Available Options: | |||
|---|---|---|---|
|
|
|
| For cheaper plastic faceplates that will do for almost all your prototyping projects click here |
|
|
|
|
PT24E-ASM | Prototype board with two 12 pins terminal block connectors and a LED, fully assembled. | CAD$14.95 In Stock |
|
Prototype board with two 12 pin terminal block connectors and a LED, fully assembled.
Description
The PT24E is a prototype board. It has been designed for a MicroX SBC Main Board to be plugged onto it, and to fit in a ENC2015S enclosure. This board will normally be used together with a MicroX SBC Main board, an enclosure and two enclosure panels (face plates). The picture on the right shows it mounted in an enclosure, with an enclosure front panel. All terminal block contacts are numbered on the enclosure panel. Additionally space has been provided to write something next to each contact.It is fully assembled, and supplied with the terminal block connector and plug as shown in the photo above.
There is plenty of prototype space for the user. All pins (CPU port pins and power) of the two 2x24 pin daughter board connectors are available, and are clearly marked on the PCB. Two 12 pin terminal block connectors are available for the users application. There are also 6 LEDs on the board, connected to a shift register, and controlled by port pins C0, C1 and C2. All LEDs have 1k resistors in series with them. Additionally space has been provided to write something next to each LED.
The board schematics and PCB layout can be downloaded here.
Additional photos
Front View
In enclosure, with enclosure front and rear panel, and daughter board
Daughter Boards
This prototype board can be used by itself and a Daughter Board. Or, with a Daughter Board, an ENC2015S enclosure and an enclosure front and rear panel.
The following MicroX SBC Main Board can be used together with this board:
• SBC65EC or SBC68EC : The following photos show the rear of the PT24E board in an ENC2015S enclosure with this SBC board and the network Enclosure Rear Panels (face plates). Choose the "Network Panel" from the options below for this Enclosure Rear Panel.
• SBC28DC : The following photos show the rear of the PT10E board in an ENC2015S enclosure with this SBC board and the RS-232 Enclosure Rear Panels (face plates). Choose the "RS232 Panel" from the options below for this Enclosure Rear Panel.
• SBC28PC-IR4 : The following photos show the rear of the PT24E board in an ENC2015S enclosure with this SBC board and the RS-485 Enclosure Rear Panels (face plates). Choose the "RS485 Panel" from the options below for this Enclosure Rear Panel.
• SBC28PC-IR2 : The following photos show the rear of the PT24E board in an ENC2015S enclosure with this SBC board and the CAN Enclosure Rear Panels (face plates). Choose the "CAN Bus Panel" from the options below for this Enclosure Rear Panel.
This product consists of:
PT24E Prototype board, fully assembled. As shown in this photo.
Two TB12FS381 12 pin terminal block plugs.
The following is NOT included, and can be added below as "Available Options":
Enclosure Panel (face plate) for the ENC2015S enclosure. Can be selected in the Enclosure Panel (Face Place) option below.
| Available Options: | |||
|---|---|---|---|
|
|
|
| For cheaper plastic faceplates that will do for almost all your prototyping projects click here |
|
|
|
|
