LCD Serial Displays
LCD2S-162LCD2S162-YGN
LCD2S162-YHY
LCD2S204A-YGN
LCD2S-162 | Serial Display Daughter Board for 16x2 display with a high speed SPI/I2C serial bus, keypad encoder and 5 user I/Os, Lead Free. | CAD$25.40 In Stock |
|
Description
The LCD2S-162 is a RoHS compliant Serial LCD Daughter board that can be connected to a standard 16x2 Character Display Module that supports 4 bit mode. All 16 x 2 Characters Modules sold on our site support 4 bit mode, and nearly all commercially available 16x2 line character modules support it too. We have not found a single 16x2 LCD display from any manufacturer that does not support 4 bit mode yet! The LCD2S-162 has a high speed SPI/I2C serial bus. For convenience the I2C and SPI signals are available via a Micro Match type connector, and a standard 2.54mm, 2x5 row pin header. Most new Modtronix SBC boards have Micro Match connectors, and can be connected to the LCD2S-162. The MICROMATCH-6MW Micro Match connector can be used to create a cable to connect the LCD2S-162 and SBC boards together. Or, our 150mm or 300mm Micro Match cables can be use.A 2-way DIP switch is used to configure the unit for SPI or I2C operation (3 different addresses). The SPI mode is very simple, and enables the user to control the display via a very simple software routine. For more complex configurations, and multiple displays, the I2C bus can be used. The contrast and backlight are software controlled, and can be set to 254 levels.
A keypad with up to 16 buttons (4 rows by 4 columns) can be added to the display via a standard 10 pin, 2.54mm header. Our 12 buttons or 16 buttons keypads can be used, and can be connected to the LCD2S-162 via the CAB16RIB150 ribbon cable. When using the I2C serial bus, an interrupt line will be activated when a key is pressed, informing the user that there is key data to be read. Alternatively the LCD2S-162 can be polled to see if it has any pending keypad data.
The displays has 5 user configurable, general purpose inputs/outputs. Two of them can deliver up to 1000mA each, and have protection circuitry for driving relays.
Download the datasheets below for further details on this product, and list of all commands.
| Additional photos: click on text for larger photos | ||
|---|---|---|
|
|
|
Features
Can be controlled via a high speed SPI or I2C bus. Both busses can operate at speeds close to 1Mbits/sec!Large number of LCD commands for moving cursor, moving display and more
Up to 8 custom characters can be defined, a utility for creating custom characters is available here
Built in commands for drawing Bar Graphs
LCD Backlighting controlled via software, has 254 brightness levels
LCD Contrast controlled via software, has 254 contrast levels
User configurable start up screen
80 Byte buffer for messages received via serial interface
Two high current, open collector outputs with output currents up to 1000mA each, and relay protection circuitry
3 general purpose input/output pins
Keypad encoder for a keypad up to 16 keys (4 rows by 4 columns)
Keypad has a configurable button repeat delay and repeat rate
Can be configured to sound a buzzer (connected to OUT2) each time a button is pressed
6 Pin Micro Match connector with I2C, SPI and power signals
Standard 10 Pin (1x10), 2.54mm connector for connecting a keypad of up to 4 rows by 4 columns
Standard 10 Pin (5x2), 2.54mm connector with user outputs, I2C, SPI and power signals
DIP switch for setting serial mode and I2C address
Low current consumption - without LCD backlight is about 4mA
High quality machine assembly, with brand name, quality components:
All electrolytic capacitors used are extra long life Panasonic brand, which is 5 times more than standard!
PCB is Gold plated for best contact and no corrosion
All pin headers are gold plated for best possible contact
Lead free, RoHS compliant assembly
Application Notes and Source Code
| Web | Data | ||
| LCD2S I2C/SPI Daughter Board Manual for firmware V1.4 Board. To see what has changed in current version, click here. |
| ||
| SPI and I2C Examples, Source Code and user forum |
|
This product consists of a fully assembled, programmed and tested LCD2S-162 board. The 16 pin connector that fits onto the LCD display is also assembled. To use this board with a 16x2 Character Display Module it just has to be soldered to the back of it.
LCD2S-162YGN | Serial LCD Display with a high speed SPI/I2C serial bus, 2x16 characters, STN yellow/green, no backlight, Wide Temperature range, Lead Free. | CAD$29.65 In Stock |
|
Description
The LCD2S-162YGN is a Serial LCD Character Display Module with a high speed SPI/I2C serial bus. The LCD display is a 2x16 character STN yellow/green display with no backlight, and is RoHS compliant. For convenience the I2C and SPI signals are available via a Micro Match type connector, and a standard 2.54mm, 2x5 row pin header. Most new Modtronix SBC boards have Micro Match connectors, and can be connected to the LCD2S-162YGN. The MICROMATCH-6MW Micro Match connector can be used to create a cable to connect the LCD2S-162YGN and SBC boards together. Or, our 150mm or 300mm Micro Match cables can be use. Current SBC boards that have compatible Micro Match connectors are the SBC28DC, SBC28PC-IR2, SBC65EC, SBC68EC.A 2-way DIP switch is used to configure the unit for SPI or I2C operation (3 different addresses). The SPI mode is very simple, and enables the user to control the display via a very simple software routine. For more complex configurations, and multiple displays, the I2C bus can be used. The contrast and backlight are software controlled, and can be set to 254 levels.
A keypad with up to 16 buttons (4 rows by 4 columns) can added to the LCD2S-162YGN. Our 12 button or 16 button keypads can be used, and can be connected to the LCD2S-162YGN via the CAB16RIB150 ribbon cable. When using the I2C serial bus, an interrupt line will be activated when a key is pressed, informing the user that there is key data to be read. Alternatively the LCD2S-162YGN can be polled to see if it has any pending keypad data.
The displays has 5 user configurable, general purpose inputs/outputs. Two of them can deliver up to 1000mA each, and have protection circuitry for driving relays.
Download the datasheets below for further details on this product, and list of all commands.
| Additional photos: click on text for larger photos | ||
|---|---|---|
|
|
|
Features
Can be controlled via a high speed SPI or I2C bus. Both busses can operate at speeds close to 1Mbits/sec!Large number of LCD commands for moving cursor, moving display and more
Up to 8 custom characters can be defined, a utility for creating custom characters is available here
Built in commands for drawing Bar Graphs
LCD Backlighting controlled via software, has 254 brightness levels
LCD Contrast controlled via software, has 254 contrast levels
User configurable start up screen
80 Byte buffer for messages received via serial interface
Two high current, open collector outputs with output currents up to 1000mA each, and relay protection circuitry
3 general purpose input/output pins
Keypad encoder for a keypad up to 16 keys (4 rows by 4 columns)
Keypad has a configurable button repeat delay and repeat rate
Can be configured to sound a buzzer (connected to OUT2) each time a button is pressed
6 Pin Micro Match connector with I2C, SPI and power signals
Standard 10 Pin (1x10), 2.54mm connector for connecting a keypad of up to 4 rows by 4 columns
Standard 10 Pin (5x2), 2.54mm connector with user outputs, I2C, SPI and power signals
DIP switch for setting serial mode and I2C address
Low current consumption - without LCD backlight is about 4mA
High quality machine assembly, with brand name, quality components:
All electrolytic capacitors used are extra long life Panasonic brand, which is 5 times more than standard!
PCB is Gold plated for best contact and no corrosion
All pin headers are gold plated for best possible contact
Lead free, RoHS compliant assembly
LCD Specifications
Number of Characters: 16 characters x 2 LinesCharacter Table: English-European (RS in Datasheet)
Module dimension: 80.0mm x 36.0mm x 13.2mm(MAX)
View area: 66.0 x 16.0 mm
Active area: 56.2 x 11.5 mm
Dot size: 0.56 x 0.66 mm
Dot pitch: 0.60 x 0.70 mm
Character size: 2.96 x 5.46 mm
Character pitch: 3.55 x 5.94 mm
LCD type: STN, Positive, Reflective, Yellow/Green
Duty: 1/16
View direction: Wide viewing angle
Backlight Type: None
RoHS Compliant: lead free
Operating Temperature: -20°C to + 70°C
Application Notes and Source Code
| Web | Data | ||
| LCD2S I2C/SPI Daughter Board Manual for firmware V1.4 Board. To see what has changed in current version, click here. |
| ||
| LCD Character Module Datasheet |
| ||
| SPI and I2C Examples, Source Code and user forum |
| ||
| Web based utility for creating custom characters |
|
This product consists of a LCD Character Module with the LCD2S board soldered onto the back of it, like shown in the photos above! The board is fully assembled, programmed and tested.
To buy, click Add To Cart button to the right.
LCD2S-162YHY | Serial LCD Display with a high speed SPI/I2C serial bus, 2x16 characters, STN yellow/green, yellow/green array LED backlight, Wide Temperature range, Lead Free | CAD$31.75 In Stock |
|
Description
The LCD2S-162YHY is a Serial LCD Character Display Module with a high speed SPI/I2C serial bus. The LCD display is a 2x16 character STN yellow/green display with a yellow/green LED backlight, and is RoHS compliant. For convenience the I2C and SPI signals are available via a Micro Match type connector, and a standard 2.54mm, 2x5 row pin header. Most new Modtronix SBC boards have Micro Match connectors, and can be connected to the LCD2S-162YHY. The MICROMATCH-6MW Micro Match connector can be used to create a cable to connect the LCD2S-162YHY and SBC boards together. Or, our 150mm or 300mm Micro Match cables can be use. Current SBC boards that have compatible Micro Match connectors are the SBC28DC, SBC28PC-IR2, SBC44B and the SBC65EC.A 2-way DIP switch is used to configure the unit for SPI or I2C operation (3 different addresses). The SPI mode is very simple, and enables the user to control the display via a very simple software routine. For more complex configurations, and multiple displays, the I2C bus can be used. The contrast and backlight are software controlled, and can be set to 254 levels.
A keypad with up to 16 buttons (4 rows by 4 columns) can added to the LCD2S-162YHY. Our 12 buttons or 16 buttons keypads can be used, and can be connected to the LCD2S-162YHY via the CAB16RIB150 ribbon cable. When using the I2C serial bus, an interrupt line will be activated when a key is pressed, informing the user that there is key data to be read. Alternatively the LCD2S-162YHY can be polled to see if it has any pending keypad data.
The displays has 5 user configurable, general purpose inputs/outputs. Two of them can deliver up to 1000mA each, and have protection circuitry for driving relays.
Download the datasheets below for further details on this product, and list of all commands.
| Additional photos: click on text for larger photos | ||
|---|---|---|
|
|
|
Features
Can be controlled via a high speed SPI or I2C bus. Both busses can operate at speeds close to 1Mbits/sec!Large number of LCD commands for moving cursor, moving display and more
Up to 8 custom characters can be defined, a utility for creating custom characters is available here
Built in commands for drawing Bar Graphs
LCD Backlighting controlled via software, has 254 brightness levels
LCD Contrast controlled via software, has 254 contrast levels
User configurable start up screen
80 Byte buffer for messages received via serial interface
Two high current, open collector outputs with output currents up to 1000mA each, and relay protection circuitry
3 general purpose input/output pins
Keypad encoder for a keypad up to 16 keys (4 rows by 4 columns)
Keypad has a configurable button repeat delay and repeat rate
Can be configured to sound a buzzer (connected to OUT2) each time a button is pressed
6 Pin Micro Match connector with I2C, SPI and power signals
Standard 10 Pin (1x10), 2.54mm connector for connecting a keypad of up to 4 rows by 4 columns
Standard 10 Pin (5x2), 2.54mm connector with user outputs, I2C, SPI and power signals
DIP switch for setting serial mode and I2C address
Low current consumption - without LCD backlight is about 4mA
High quality machine assembly, with brand name, quality components:
All electrolytic capacitors used are extra long life Panasonic brand, which is 5 times more than standard!
PCB is Gold plated for best contact and no corrosion
All pin headers are gold plated for best possible contact
Lead free, RoHS compliant assembly
LCD Specifications
Number of Characters: 16 characters x 2 LinesCharacter Table: English-European (RS in Datasheet)
Module dimension: 80.0mm x 36.0mm x 13.2mm(MAX)
View area: 66.0 x 16.0 mm
Active area: 56.2 x 11.5 mm
Dot size: 0.56 x 0.66 mm
Dot pitch: 0.60 x 0.70 mm
Character size: 2.96 x 5.46 mm
Character pitch: 3.55 x 5.94 mm
LCD type: STN, Positive, Transflective, Yellow/Green
Duty: 1/16
View direction: Wide viewing angle
Backlight Type: yellow/green LED
RoHS Compliant: lead free
Operating Temperature: -20°C to + 70°C
Application Notes and Source Code
| Web | Data | ||
| LCD2S I2C/SPI Daughter Board Manual for firmware V1.4 Board. To see what has changed in current version, click here. |
| ||
| LCD Character Module Datasheet |
| ||
| SPI and I2C Examples, Source Code and user forum |
| ||
| Web based utility for creating custom characters |
|
This product consists of a LCD Character Module with the LCD2S board soldered onto the back of it, like shown in the photos above! The board is fully assembled, programmed and tested.
LCD2S204A-YHY | Serial LCD Display with a high speed SPI/I2C serial bus, 4x20 characters, STN yellow/green, yellow/green array LED backlight, Wide Temperature range, Lead Free. | CAD$42.35 In Stock |
|
Description
The LCD2S-204YHY is a Serial LCD Character Display Module with a high speed SPI/I2C serial bus. The LCD display is a 4x20 character STN yellow/green display with a yellow/green LED backlight, and is RoHS compliant. For convenience the I2C and SPI signals are available via a Micro Match type connector, and a standard 2.54mm, 2x5 row pin header. Most new Modtronix SBC boards have Micro Match connectors, and can be connected to the LCD2S-204YHY. The MICROMATCH-6MW Micro Match connector can be used to create a cable to connect the LCD2S-204YHY and SBC boards together. Or, our 150mm or 300mm Micro Match cables can be use. Current SBC boards that have compatible Micro Match connectors are the SBC28DC, SBC28PC-IR2, SBC65EC and SBC68EC.A 2-way DIP switch is used to configure the unit for SPI or I2C operation (3 different addresses). The SPI mode is very simple, and enables the user to control the display via a very simple software routine. For more complex configurations, and multiple displays, the I2C bus can be used. The contrast and backlight are software controlled, and can be set to 254 levels.
A keypad with up to 16 buttons (4 rows by 4 columns) can added to the LCD2S-204YHY. Our 12 button or 16 button keypads can be used, and can be connected to the LCD2S-204YHY via the CAB16RIB150 ribbon cable. When using the I2C serial bus, an interrupt line will be activated when a key is pressed, informing the user that there is key data to be read. Alternatively the LCD2S-204YHY can be polled to see if it has any pending keypad data.
The displays has 5 user configurable, general purpose inputs/outputs. Two of them can deliver up to 1000mA each, and have protection circuitry for driving relays.
Download the datasheets below for further details on this product, and list of all commands.
| Additional photos: click on text for larger photos | ||
|---|---|---|
|
| The LCD2S-204YHY connected to a SBC board via the Micro Match connector. Multiple displays can also be daisy chained with this connector. |
Features
Can be controlled via a high speed SPI or I2C bus. Both busses can operate at speeds close to 1Mbits/sec!Large number of LCD commands for moving cursor, moving display and more
Up to 8 custom characters can be defined, a utility for creating custom characters is available here
Commands for drawing Bar Graphs
Commands for writing large characters spanning 2 columns and 3 rows
LCD Backlighting controlled via software, has 254 brightness levels
LCD Contrast controlled via software, has 254 contrast levels
User configurable start up screen
80 Byte buffer for messages received via serial interface
Two high current, open collector outputs with output currents up to 1000mA each, and relay protection circuitry
3 general purpose input/output pins
Keypad encoder for a keypad up to 16 keys (4 rows by 4 columns)
6 Pin Micro Match connector with I2C, SPI and power signals
Standard 10 Pin (1x10), 2.54mm connector for connecting a keypad of up to 4 rows by 4 columns
Standard 10 Pin (5x2), 2.54mm connector with user outputs, I2C, SPI and power signals
DIP switch for setting serial mode and I2C address
Low current consumption - without LCD backlight is about 4mA
High quality machine assembly, with brand name, quality components:
All electrolytic capacitors used are extra long life Panasonic brand, which is 5 times more than standard!
PCB is Gold plated for best contact and no corrosion
All pin headers are gold plated for best possible contact
Lead free, RoHS compliant assembly
LCD Specifications
Number of Characters: 20 characters x 4 LinesCharacter Table: English-European (RS in Datasheet)
Module dimension: 98.0mm x 60.0mm
View area: 77.0 x 25.2 mm
Active area: 70.4 x 20.8 mm
Dot size: 0.55 x 0.55 mm
Dot pitch: 0.60 x 0.60 mm
Character size: 2.96 x 4.75 mm
Character pitch: 3.55 x 5.35 mm
LCD type: STN, Positive, Transflective, Yellow/Green
View direction: Wide viewing angle
Backlight Type: yellow/green LED
RoHS Compliant: lead free
Operating Temperature: -20°C to + 70°C
Application Notes and Source Code
| Web | Data | ||
| LCD2S I2C/SPI Daughter Board Manual for firmware V1.4 Board. To see what has changed in current version, click here. |
| ||
| LCD Character Module Datasheet |
| ||
| SPI and I2C Examples, Source Code and user forum |
| ||
| Web based utility for creating custom characters |
|
This product consists of a LCD Character Module with the LCD2S board soldered onto the back of it, like shown in the photos above! The board is fully assembled, programmed and tested.
